Studio Eclipse SE500

Studio Eclipse SE500

Studio Eclipse SE500

36” inch soundbar with internal sub-woofer
5 out of 5 stars
5 out of 5 stars, based on 10 reviews
  • 180 Watts
  • 36" Inch
  • 2.1 Sound
  • Built-in Subwoofer
  • EQ Movie / Music / Voice
  • Bass & Treble
  • Wall Mount Kit
  • Bluetooth 5.0
  • Optical Digital
  • RCA
  • AUX
  • USB MP3 Player
  • Mains Power
  • Remote Control

3 YEAR GUARANTEE INCLUDED

ORDER BEFORE 4PM FOR NEXT DAY DELIVERY

 
£54.95
In stock
BUY INSTANTLY USING ONE OF
OUR QUICK CHECKOUT OPTIONS.
Studio Eclipse SE500
Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500 Studio Eclipse SE500
 

 

#

#

#

#

 

Technical Specifications

 

Dimensions L x D x H 91 x 8.8 x 10 cm
Weight kg 2.7 kg
Power Supply 100-240V~ 50/60Hz
Power Consumption 48W < 0.5W (Standby)
Speaker Impedance 8Ω x 2 + 4Ω
USB 5V 500mA Hi-Speed USB (2.0) / FAT32 / FAT16 32G (max) , MP3 
Audio input sensitivity 700mV
Bluetooth 5.0
Maximum output power 180 W (Max)
Remote battery type AAA (1.5V x 2)
Remote distance/angle 19.7 feet (6m) / 30°
Optical Digital Yes x 1
AUX Yes 3.5mm
RCA Yes x1

 

 

WATCH OUR PRODUCT VIDEO 

 

What's in the box

User Manual

Warranty Card

Power Cable

Remote Control

Wall Mounts

Optical Cable

Studio Eclipse Soundbar


#

User Manual

User Manual Icon Download Studio Eclipse User Manual for more detailed information.

Write Your Own Review
You're reviewing:Studio Eclipse SE500
Your Rating
Support
Use the RCA Stereo Audio Cable to connect the TV’s stereo RCA(L/R). Audio output socket to the AUX(L/R) Sockets of the unit.

Then press the AUX button on the remote control or press the SOURCE button on the unit to choose the AUX function.

Turn on your television set to use the Studio Eclipse.
Plug one end of a 3.5mm audio input cable (included) into the Line in on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs.

Plug the other end of the cable into the audio output/headphone output on an MP3 player or other audio source.

Press the POWER button on side panel or POWER button directly on the remote control to switch on the unit.

One touch the SOURCE button repeatedly or directly press LINE in button on remote control to enter LINE in mode. The mode indicator will turn green.

Audio played through the connected device will now be heard through the speakers.
You will need: An audio source with an optical audio output and a digital optical audio cable - INCLUDED

Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the speaker bar.

Press the POWER/SOURCE button on side panel or POWER button directly on the remote control to switch on the unit.

Press the OPTICAL button on the remote control to switch to Optical mode or one touch POWER/SOURCE button on main unit repeatedly to select the Optical mode. The mode indicator LED will turn Yellow.

Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned on.

Audio from the connected audio source will now be played through the speakers.

Using the native controls on your connected device, make sure the audio settings are set to PCM or optical audio and are turned on.

It is the installer responsibility to verify that the wall safely supports the total weight of the Soundbar.
- Additional tools (not included) are required for the installation.
  • Drill 2 parallel holes (Ø3-8mm each according to wall type) in the wall. The distance between 2 holes should be 580mm.
  • Firmly fix a wall plug (included) into each hole in the wall if necessary.
  • Insert a screw (included) into each dowel. Make sure to leave a 5mm gap between the wall and the screw’s head. Lift the Bar over the heads of the screws and slot into place.

User Manual IconDownload User Manual - Need more help? Simply download the user manual for more detailed information.

Frequently Asked Questions
Yes, the Studio Eclipse Soundbar comes with a Azatom Pro-Grade Optical Cable.
Yes, Simply connect your device to the Studio Eclipse Soundbar and make sure it's in BT Wireless Audio mode to play music directly from your BT Wireless Audio connected device.
Yes, The Studio Eclipse Soundbar is lightweight which allows it to be wall mounted without the need for additional brackets or frames. Simply match the attached bracket holes on the rear of the UHD2 to the ones you've drilled into your wall / cabinet / etc. and hang it makging sure its firmly attached.
180W can be incredibly loud and with a combintation of 2.1CH Drivers, AZATOM DSP & DAC Chips - You'll not be dissapointed.