In standby mode, press and hold the CLOCK button for a few seconds, then the hour indicator will blink.
Set the hour with the ▲ button or ▼ button.
Press the CLOCK button to confirm, minute indicator will blink.
Repeat steps 2-3 to set the minutes, day, month and year.
In standby mode, press and hold the CLOCK button for 3 seconds, then press the Play/Pause button to select 12 / 24 hour format.
If you're having issues with time and date synchronization see below:
By default RDS is turned on for each unit, this will sync the date and time to the radio from FM stations with a strong signal and who are broadcasting RDS time and date data. Sometime the broadcasting station could be issuing the incorrect time and date - this will then sync to your HomeHub Q. To resolve this you will need to disable RDS:
While the unit is in standby, press and hold the PLAY/PAUSE button.
The display will show SYNC, using the FAST FORWARD or REWIND buttons cycle along until OFF is displayed.
Press PLAY/PAUSE again once to confirm the RDS OFF option and return to standby mode.
If you do have any issues with the date and time after turning off RDS please contact us.
You can set two alarms which go off at different times.
Ensure that you have set the clock correctly.
Press ▲/▼ on the remote control to select an alarm sound source: FM tuner or buzzer.
Press and hold ALARM 1 or ALARM 2. The hour digits will begin to blink.
Press ▲/▼ repeatedly to set the hour. Press either ALARM 1 or ALARM 2 depending on which you are setting to move on to setting the minutes.
The minute digits begin to blink, Use the ▲/▼ buttons to select the minute and Press either ALARM 1 or ALARM 2 depending on which you are setting to move on to the next option.
Use the ▲/▼ buttons to select whether the alarm will ring for the whole week, on weekdays, or at the weekend. Press either ALARM 1 or ALARM 2 depending on which you are setting to move on to the next option.
Use the ▲/▼ buttons to select the alarm volume. Press either ALARM 1 or ALARM 2 depending on which you are setting to move on to finish setting the alarm.
Once completed, to activate and Deactivate the Alarm Timer:
With the time correctly set, Press either ALARM 1 or ALARM 2 to activate or deactivate the timer.
Pressing once will display the alarms settings - time, volume, source etc. and pressing the alarm
button again will enable or disable the alarm.
If the timer is activated, [AL1 Clock Icon] or [AL2 Clock Icon] is displayed.
If the timer is deactivated, [AL1 ] or [AL2 ] the alarm clock icon disappears.
Yes, the Line-input and the included audio cable allow you to play music from any media device with a headphone output including Android devices, MP3 Players and Laptops. Connecting via BT Wireless Audio also allows you to play music from any BT Wireless Audio enabled device.